Crash Barrier Bridge-manufacture,factory,supplier from China

Product IntroductionsHighway guardrail is an vital site visitors security facility, in most cases used to separate motor vehicles, non-motor cars and pedestrians, to make sure the protection and order of avenue traffic.

Product IntroductionsThree-wave guardrail plate is a semi-steel guardrail, composed of corrugated metal plate splicing, thru the column help to structure a non-stop structure. Its title comes from the board sketch has three waveforms, in contrast with the double-wave guardrail plate, has more desirable affect resistance and greater collision avoidance level, in particular appropriate for excessive safety necessities such as highways.

Product IntroductionsHighway double-wave guardrail is an necessary site visitors security facility, which is in the main used to forestall out-of-control cars from speeding out of the avenue and make sure using safety.

Product IntroductionsHigh-speed guardrail bolt is an important part of highway safety protection, its main function is to firmly connect the corrugated guardrail plate to the steel column, forming a strong protective barrier.

Product IntroductionsThe thrie beam guardrail is a highly effective safety barrier designed for use on highways, expressways, and other high-traffic roadways. Known for its superior strength and durability, the Thrie Beam system features three corrugated beams, which provide enhanced energy absorption and vehicle containment during collisions.

Product IntroductionsAluminized zinc corrugated plate is a kind of metal material based on aluminized zinc steel plate. Its coating is composed of 55% aluminum, 43.4% zinc and 1.6% silicon, which has both the barrier protection function of aluminum and the sacrificial protection function of zinc. The material has a strong corrosion resistance, life of more than 20 years, and can still maintain stable performance at 315℃ high temperature environment.

Product IntroductionsGalvalume Steel Sheet is a kind of alloy coated steel plate which is obtained by aluminum-zinc alloy covering on the surface of steel plate. This steel plate is composed of 55% aluminum, 43.4% zinc and 1.6% silicon solidified at 600℃, forming a dense quaternary junction crystal structure, thus providing a strong and effective barrier against corrosion caused penetration. Its surface is unique smooth, flat and gorgeous star flowers, the primary color is silver white, widely used in many fields.

Product IntroductionsGalvanized steel coil is a kind of steel with a layer of zinc attached to the surface, which has light weight, beautiful appearance and good corrosion resistance. Anti-fingerprint treatment is a special surface treatment technology, mainly used to improve the surface properties of galvanized steel coils, making it easier to clean and maintain.

Product IntroductionsGalvanized steel coil has many advantages, which make it widely used in the construction industry. In the manufacturing process, the surface of the galvanized steel coil is covered with a layer of zinc, which makes its corrosion resistance greatly enhanced. Compared with traditional carbon steel materials, galvanized steel coil corrosion resistance is more superior, can be used in a variety of harsh environments for a long time, reducing the cost of maintenance and replacement.

Product IntroductionsCharacteristics of galvanized steel coilExcellent anti-corrosion propertyThe zinc layer on the surface of the galvanized steel coil can effectively isolate the direct contact between the steel plate and the external environment, thereby preventing the steel plate from being corroded. This anti-corrosion property enables galvanized steel coil to maintain a long service life in harsh environments.Good processabilityGalvanized steel coil has good formability and weldability, and can be easily processed into various shapes and sizes.

Product IntroductionsCold-rolled galvanized coil is a cold-rolled metal product, the floor is bright, excessive finish, frequently used in steel products, precision electronics, equipment manufacturing and different fields.

Product IntroductionsThe 0.10mm thickness galvanized steel sheet is widely used in various applications due to its excellent corrosion resistance and durability.

Product IntroductionsDX53D galvanized coil is a kind of steel with high zinc layer thickness, and its zinc coating is fine crystalline, uniform and non-porous, and has good corrosion resistance. The zinc layer obtained by electroplating is pure, and the corrosion rate in the fog of acid and alkali is slow, which can effectively protect the steel matrix. In addition, zinc coating after chromic acid passivation to form a variety of colors such as white, color, not only beautiful, but also has a certain decorative.

Product IntroductionsCharacteristics of galvanized metal coilExcellent anti-corrosion propertyThe zinc layer on the floor of the galvanized metal coil can efficiently isolate the direct contact between the metal plate and the exterior environment, thereby stopping the metal plate from being corroded.

Product IntroductionsColor steel galvanized corrugated board is a combination of galvanized steel plate and color coating process of metal materials, the surface of the corrugated texture, both galvanized layer of corrosion resistance and decorative color coating layer. Its base material is usually cold-rolled steel plate, formed by hot-dip galvanizing process rust layer, and then rolled into a wavy structure to enhance rigidity, some products will also spray polyester, fluorocarbon and other coatings on the surface to improve weather resistance and beauty.

Product IntroductionsHot-dip galvanized metal coil is appropriate for fabrication by means of forming, urgent and bending due to the fact of its top notch forming property, portray ability, welding ability.

Product IntroductionsHot-dip galvanized steel coil is suitable for fabrication by forming, pressing and bending because of its excellent forming property, painting ability, welding ability. Hot-dip galvanized steel coil is mainly used in construction, home appliances, automobiles, machinery, electronics, light industry and other industries. Hot dip galvanized steel Surface Treatment: Oiled,Passivated, passivation+oils, etc.Product ParamentersProduct nameSeel CoilGradeSGCC/SGCH/G550.G350Thickness0.10-3.0mmWidth30-1250mmZinc CoatingZ30-275gSrface TreatmentLight oil.

Product IntroductionsRaw material preparation: The raw materials usually used are cold-rolled steel plates or hot-rolled steel plates, which need to undergo strict quality testing to ensure that they meet the production requirements.Steel strip pretreatment: The purpose is to remove oil, rust and other impurities on the surface of the steel strip to ensure the adhesion and quality of the galvanized layer.

Product IntroductionsGalvanized steel coil is the steel coil treated by hot dip galvanizing process, and the surface is covered with a zinc layer, which has excellent corrosion resistance and weather resistance.

Product IntroductionsGalvanized strip steel coil is a narrow strip steel coil made of cold-rolled or hot-rolled steel sheet as the base material, after forming zinc layer on the surface by hot-dip galvanizing process, and then by strip processing. The production process mainly includes raw material preparation, steel strip pretreatment, hot dip galvanizing, cold rolling forming, strip cutting and other steps. Among them, strip processing is to cut wide galvanized steel coil into specific width strip products by cutting equipment to meet the needs of different application scenarios.

Product IntroductionsSGCC galvanized steel coil is a steel product widely used in many industries. Its main components include DX51D and Q195 and other materials, after hot dip galvanizing treatment, with good corrosion resistance and decorative 1. This kind of steel is widely used in shipbuilding, building materials, industrial equipment and other fields.

Product IntroductionsGalvanized strip metal coil is a slim strip metal coil made of cold-rolled or hot-rolled metal sheet as the base material, after forming zinc layer on the floor by means of hot-dip galvanizing process, and then through strip processing. The manufacturing procedure in most cases consists of uncooked cloth preparation, metal strip pretreatment, warm dip galvanizing, bloodless rolling forming, strip slicing and different steps.

Product IntroductionsHot-dip galvanized steel plate is suitable for fabrication by forming, pressing and bending because of its excellent forming property, painting ability, welding ability.

Product IntroductionsZinc-coated steel coil with large zinc-coated flowers is a coating plate with obvious zinc-coated flowers formed by free growth of zinc grains in the process of hot galvanizing. The formation of this large zinc flower is mainly due to the hot dip plating under the condition that the zinc liquid contains antimony or lead, so that the zinc grains grow freely during the normal solidification process. Zinc flower obtained by condensation of zinc layer under normal conditions.